Join our mailing list!








  Home > Safety Supplies > Fall Protection >

External Shock Lanyard by Guardian Fall Protection, Single Leg 6 length, Rebar Snap Hook
External Shock Lanyard by Guardian Fall Protection, Single Leg – 6’ length, Rebar Snap Hook


 
Our Price: $38.00

item#: VBSDFALL01220
Qty:

Description Sizing Guides Product Codes
 

Item #VBSDFALL01220

Product Specifications:
Applicable Standards: ANSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910

Worker Capacity Range:
130-310 lbs.

Webbing Material(s):
Polyester and nylon

Compliant with all applicable OSHA 1910, OSHA 1926 Subpart M, ANSI Z359.13-2009, and ANSI A10.32-2012 regulations.
Product-Specific Applications Personal Fall Arrest: Shock Absorbing Lanyards may be used in Personal Fall Arrest applications to support a MAXIMUM 1 Personal Fall Arrest System (PFAS). Structure must withstand loads applied in the directions permitted by the system of at least 5,000 lbs. Maximum free fall is up to 6. ALWAYS refer to lanyard labeling for product-specific details. Applicable D-ring: Dorsal.

Restraint: Shock Absorbing Lanyards may be used in Restraint applications. Restraint systems prevent workers from reaching the leading edge of a fall hazard. Always account for fully extended length of lanyard. Structure must withstand loads applied in the directions permitted by the system of at least 1,000 lbs. No free fall is permitted. Restraint systems may only be used on surfaces with slopes up to 4/12 (vertical/horizontal). Applicable D-rings: Dorsal, Chest, Side, Shoulder.

Work Positioning: Shock Absorbing Lanyards may be used in Work Positioning applications. Work Positioning systems allow a worker to be supported while in suspension and work freely with both hands. Structure must withstand loads applied in the directions permitted by the system of at least 3,000 lbs. Maximum allowable free fall is 2. Applicable D-rings: Side, Shoulder.

Warning for All Applications:
Not all Shock Absorbing Lanyards may be used in every application type. ALWAYS consider lanyard length, design, and any other structural components. ALWAYS read and adhere to product instructions and labels. A Competent Person MUST make a determination regarding correct lanyard application and compatibility. Worker weight capacity range (including all clothing, tools, and equipment) is 130-310 pounds. Materials: Polyester, nylon, and aluminum or steel
  • Attach lanyard snap hook or carabiner to compatible harness D-ring. ALWAYS attach lanyard shock absorber end to applicable harness D-ring. Shock absorber end MUST NEVER be attached to anchorage connector. For lanyards with two, integrally connected legs, only attach the central snap hook or carabiner to the applicable harness D-ring.
  • Attach remaining snap hook end of lanyard to compatible anchorage connector. Rebar Hooks MUST ONLY be connected to structural rebar. Ensure that all connectors are self-closing and self-locking, and that there is no risk of roll-out.
  • NEVER work with employed harness D-ring positioned above the anchorage connector, unless permitted by specific application or combination of equipment. A Competent Person must make a determination regarding the acceptability of working above an anchorage connector.
Features
  • 1 Nylon Web
  • Clear Shock Panel for easy inspection
  • 3,600 lb. connector gate
  • Weight 2.75 lb.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Safety Supplies > Fall Protection
Safety Supplies